Clear Inlinepower Available - Enterasys Matrix 2G4072-52 Configuration Manual

General Configuration Command Set
Configuring Power over Ethernet (PoE)
2.2.5.5

clear inlinepower available

Use this command to reset the percentage of the total power available to a chassis to the default
value of 100.
clear inlinepower available
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the maximum inline power available to the chassis to 100 percent
Matrix(rw)->clear inlinepower available
2-102 Matrix DFE-Platinum and Diamond Series Configuration Guide
: