General Configuration Command Set
Setting Basic Device Properties
2.2.3.15
set summertime
Use this command to enable or disable the daylight savings time function.
set summertime {enable | disable} [zone]
Syntax Description
enable | disable
zone
Command Defaults
If a zone name is not specified, none will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable daylight savings time function:
Matrix(rw)->set summertime enable
2-62 Matrix DFE-Platinum and Diamond Series Configuration Guide
Enables or disables the daylight savings time function.
(Optional) Applies a name to the daylight savings time
settings.