Logging And Network Management Command Set
Configuring RMON
11.2.4.24 set rmon matrix properties
Use this command to configure an RMON matrix entry.
set rmon matrix properties index port-string [owner]
Syntax Description
index
port-string
owner
Command Defaults
If owner is not specified, monitor will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to configure RMON matrix entry 1 for fe.1.1
Matrix(rw)->
11-82 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies an index number for this entry. An entry will
automatically be created if an unused index number is
chosen. Maximum number of entries is 2. Maximum
value is 65535.
Specifies port(s) on which to monitors statistics.
(Optional) Specifies the name of the entity that
configured this entry.
set rmon matrix properties 1 fe.1.1