Show Vlan Constraint - Enterasys Matrix 2G4072-52 Configuration Manual

VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
7.3.3.9

show vlan constraint

Use this command to display constraint settings for one or more VLAN's. Constraints determine
which VLANs belong to which Filter Databases (FIDs).
show vlan constraint [vlan-list]
Syntax Description
vlan-list
Command Defaults
If vlan-list is not specified, settings for all VLANs will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the constraint settings for VLAN 1:
Matrix(rw)->show vlan constraint 1
VLAN ID VLAN SET
Table 7-3
Table 7-3 show vlan constraint Output Details
Output
VLAN ID
7-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays constraint settings for specific
VLAN(s).
1 100
2 2
3 300
4 400
101 2
102 2
103 2
provides an explanation of the command output.
What It Displays...
Number identifying the VLAN.
VLAN SET TYPE
Shared
Shared
Shared
Shared
Shared
Shared
Shared