Show Physical Alias - Enterasys Matrix 2G4072-52 Configuration Manual

2.2.3.33

show physical alias

Use this command to display the alias, a text name, for one or more physical objects.
show physical alias [chassis] | [slot slot] | [backplane backplane] | [module
module] | [powersupply powersupply] | [powersupply-slot powersupply-slot] |
[fan] | [fan-slot] | [port-string port-string]
Syntax Description
chassis
slot slot
backplane
backplane
module module
powersupply
powersupply
powersupply-slot
powersupply-slot
fan
fan-slot
port-string
port-string
Command Defaults
If no parameters are specified, all physical alias information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
(Optional) Displays the alias set for the chassis.
(Optional) Displays the alias set for a specified slot in the
chassis.
(Optional) Displays the alias set for the backplane. Valid
values are 1 for FTM 1 and 2 for FTM 2.
(Optional) Displays the alias set for a specified module. A
maximum of one module alias per slot is allowed.
(Optional) Displays the alias set for a specified power
supply. Valid values are 1 or 2.
(Optional) Displays an alias set for a specific power
supply slot.
(Optional) Displays the alias set for the fan tray.
(Optional) Displays an alias for the fan tray's slot.
(Optional) Displays the alias set for a specified
port-string. For a detailed description of possible
port-string values, refer to
Matrix DFE-Platinum and Diamond Series Configuration Guide
General Configuration Command Set
Setting Basic Device Properties
Section 4.1.1.
2-83