Show Lldp Port Status - Enterasys Matrix 2G4072-52 Configuration Manual

3.2.4.2

show lldp port status

Use this command to display the LLDP status of one or more ports. The command lists the ports
that are enabled to send and receive LLDPPDUs. Ports are enabled or disabled with the
status command.
show lldp port status [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, LLDP status information will be displayed for all
ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display LLDP port status information for all ports.
Matrix(ro)->show lldp port status
Tx-Enabled Ports
Rx-Enabled Ports
(Optional) Displays LLDP status for one or a range of
ports.
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12; ge.5.1-12;
tg.6.1-2; fe.7.1-48
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12; ge.5.1-12;
tg.6.1-2; fe.7.1-48
Matrix DFE-Platinum and Diamond Series Configuration Guide
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
set lldp port
3-29