Enterasys Matrix 2G4072-52 Configuration Manual page 227

3.2.4.4 show lldp port tx-tlv
Use this command to display information about which optional TLVs have been configured to be
transmitted on ports. Ports are configured to send optional TLVs with the
command.
show lldp port tx-tlv [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, TLV configuration information will be displayed for
all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display transmit TLV information for three ports.
Matrix(ro)->show lldp port tx-tlv ge.1.1-3
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Column Pro Id uses letter notation for enable: s-stp, l-lacp, g-gvrp
Ports Port Sys
Desc Name Desc Cap Addr Id
------- ---- ---- ---- --- ---- ---- ---- --- --- ---- ----
ge.1.1 * *
ge.1.2 * *
ge.1.3 * *
(Optional) Displays information about TLV configuration
for one or a range of ports.
Sys Sys Mgmt Vlan Pro
* * * *
* * * *
* * * *
Matrix DFE-Platinum and Diamond Series Configuration Guide
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
MAC PoE Link Max
Id PHY Aggr Frame Cap Pol Loc PoE
slg * *
slg * *
slg * *
set lldp port tx-tlv
MED MED MED MED
--- --- --- ---
* * * *
* * * *
* * * *
3-31