9.3.1.3
clear port priority
Use this command to reset the current CoS port priority setting to 0. This will cause all frames
received without a priority value in its header to be set to priority 0.
clear port priority port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset fe.1.11 to the default priority:
Matrix(rw)->clear port priority fe.1.11
Port Priority and Rate Limiting Configuration Command Set
Specifies the port for which to clear priority. For a detailed
description of possible port-string values, refer to
Section
4.1.1.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring Port Priority
9-5