Set Igmp Protocols - Enterasys Matrix 2G4072-52 Configuration Manual

10.4.2.14 set igmp protocols

Use this command to changes the IGMP classification of received IP frames
set igmp protocols [classification classification] [protocol-id protocol-id]
[modify]
Syntax Description
classification
classification
protocol-id
protocol-id
modify
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to change IGMP routing protocols to a protocol id of 3:
Matrix(rw)->set igmp protocols classification 2 protocol-id 3
modify
Specifies the classification. Options are:
•
1-multicast data
•
2-routing protocol
•
3-ignore
The protocol ids to change(0-255).
Add to existing classifications. If not used, protocols will
be overwritten.
Matrix DFE-Platinum and Diamond Series Configuration Guide
IGMP Configuration Command Set
Configuring IGMP
10-23