Show Nodealias Config - Enterasys Matrix 2G4072-52 Configuration Manual

Logging And Network Management Command Set
Configuring Node Aliases
11.2.7.4

show nodealias config

Use this command to display node alias configuration settings on one or more ports.
show nodealias config [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, node alias configurations will be displayed for all
ports.
Command Mode
Read-Only.
Example
This example shows how to display node alias configuration settings for ports fe.2.1 through 9:
Matrix(rw)->show nodealias config fe.2.1-9
Port Number
-----------
fe.2.1
fe.2.2
fe.2.3
fe.2.4
fe.2.5
fe.2.6
fe.2.7
fe.2.8
fe.2.9
Table 11-16
11-146 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays node alias configuration settings for
specific port(s). For a detailed description of possible
port-string values, refer to
Max Entries
-----------
16
47
47
47
47
47
47
47
4000
provides an explanation of the command output.
Section 4.1.1.
Used Entries
------------
0
0
2
0
0
2
0
0
1
Status
------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled