Show Spantree Spanguardtimeout - Enterasys Matrix 2G4072-52 Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.57

show spantree spanguardtimeout

Use this command to display the Spanning Tree span guard timeout setting.
show spantree spanguardtimeout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the span guard timeout setting:
Matrix(rw)->
spanguard timeout is set at 300 seconds.
6-70 Matrix DFE-Platinum and Diamond Series Configuration Guide
show spantree spanguardtimeout