Configuring Snmp Users, Groups And Communities - Enterasys Matrix 2G4072-52 Configuration Manual

SNMP Configuration Command Set

Configuring SNMP Users, Groups and Communities

5.3.2 Configuring SNMP Users, Groups and Communities
Purpose
To review and configure SNMP users, groups and v1 and v2 communities. These are defined as
follows:
•
User — A person registered in SNMPv3 to access SNMP management.
•
Group — A collection of users who share the same SNMP access privileges.
•
Community — A name used to authenticate SNMPv1 and v2 users.
Commands
The commands used to review and configure SNMP users, groups and communities are listed below
and described in the associated section as shown.
•
show snmp user
•
set snmp user (Section
•
clear snmp user
•
show snmp group
•
set snmp group
•
clear snmp group
•
show snmp community
•
set snmp community
•
clear snmp community
5-12 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Section 5.3.2.1)
5.3.2.2)
(Section 5.3.2.3)
(Section 5.3.2.4)
(Section 5.3.2.5)
(Section 5.3.2.6)
(Section 5.3.2.7)
(Section 5.3.2.8)
(Section 5.3.2.9)