Port Configuration Command Set
Enabling / Disabling Jumbo Frame Support
4.3.5.1
show port jumbo
Use this command to display the status of jumbo frame support and maximum transmission units
(MTU) on one or more ports.
show port jumbo [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, jumbo frame support status for all ports will display.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of jumbo frame support for ge.1.1:
Matrix(rw)->show port jumbo ge.1.1
Port Number
-----------
ge.1.1
4-48 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays the status of jumbo frame support
for specific port(s). For a detailed description of
possible port-string values, refer to
Jumbo Oper Status
-----------------
Disabled
Jumbo Admin Status
------------------
Disabled
Section
4.1.1.
Jumbo MTU
---------
10239