Logging And Network Management Command Set
Configuring RMON
11.2.4.21 set rmon topN status
Use this command to enable an RMON topN entry.
set rmon topN status index enable |
Syntax Description
index
enable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable RMON TopN entry 1:
Matrix(rw)->
11-78 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies an index number for this entry. Maximum
number of entries is 10. Maximum value is 65535.
Enables this TopN entry.
set rmon topN status 1 enable