Clear Spantree Backuproottrapenable - Enterasys Matrix 2G4072-52 Configuration Manual

6.2.1.70

clear spantree backuproottrapenable

Use this command to resets the Spanning Tree backup root trap function to the default state of
disabled.
clear spantree backuproottrapenable.
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the backup root trap function:
Matrix(rw)->clear spantree backuproottrapenable
Matrix DFE-Platinum and Diamond Series Configuration Guide
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-83