11.2.7 Configuring Node Aliases
Purpose
To review, configure, disable and re-enable node (port) alias functionality, which determines what
network protocols are running on one or more ports.
Commands
Commands to configure node aliases are listed below and described in the associated section as
shown.
•
show nodealias
(Section
•
show nodealias mac
•
show nodealias protocol
•
show nodealias config
•
set nodealias
(Section
•
set nodealias maxentries
•
clear nodealias
(Section
•
clear nodealias config
11.2.7.1)
(Section
11.2.7.2)
(Section
11.2.7.3)
(Section
11.2.7.4)
11.2.7.5)
(Section
11.2.7.6)
11.2.7.7)
(Section
11.2.7.8)
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring Node Aliases
11-139