Clear Logging Application - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.1.10 clear logging application

Use this command to reset the logging severity level for one or all applications to the default value
of 6 (notifications of significant conditions).
clear logging application {mnemonic | all}
Syntax Description
mnemonic | all
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the logging severity level for SSH:
Matrix(rw)->
(Optional) Resets the severity level for a specific
application or for all applications. Valid mnemonic values
and their corresponding applications are listed in
Table 11-3.
clear logging application SSH
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring System Logging
11-19