Clear Inlinepower Mode - Enterasys Matrix 2G4072-52 Configuration Manual

General Configuration Command Set
Configuring Power over Ethernet (PoE)
2.2.5.3

clear inlinepower mode

Use this command to reset chassis power allocation to the default mode of auto.
clear inlinepower mode
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the chassis power allocation mode to auto:
Matrix(rw)->clear inlinepower mode
2-100 Matrix DFE-Platinum and Diamond Series Configuration Guide