Table of Contents
Advertisement
SNMP Configuration Command Set
Configuring SNMP Users, Groups and Communities
5.3.2.7
show snmp community
Use this command to display SNMP community names and status. In SNMPv1 and v2, community
names act as passwords to remote management.
show snmp community [name]
Syntax Description
name
Command Defaults
If name is not specified, information will be displayed for all SNMP communities.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display information about the SNMP "public" community name. For a
description of this output, refer to set snmp community
Matrix(rw)->show snmp community public
--- Configured community strings ---
Name
Security name
Context
Transport tag
Storage type
Status
5-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays SNMP information for a specific
community name.
= public
= public
=
=
= nonVolatile
= active
(Section
5.3.2.8):
Hide quick links:
Advertisement
Chapters
Table of Contents
