Show System Hardware - Enterasys Matrix 2G4072-52 Configuration Manual

General Configuration Command Set
Setting Basic Device Properties
2.2.3.8

show system hardware

Use this command to display the system's hardware configuration.
show system hardware
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
The example on the following page shows a portion of the information displayed with the show
system hardware command.
NOTE: Depending on the hardware configuration of your Matrix system, your output will
vary from the example shown.
2-52 Matrix DFE-Platinum and Diamond Series Configuration Guide