Set Physical Assetid - Enterasys Matrix 2G4072-52 Configuration Manual

2.2.3.37

set physical assetid

Use this command to set the asset ID for a module.
set physical assetid module module string
Syntax Description
module module
string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the asset ID information for module 1 to "dfe1":
Matrix(rw)->set physical assetid module 1 dfe1
Sets an asset ID for a specific module.
Specifies the asset ID.
Matrix DFE-Platinum and Diamond Series Configuration Guide
General Configuration Command Set
Setting Basic Device Properties
2-89