7.3.3.4
show vlan interface
Use this command to display the MIB-II interface entry mapped to a VLAN.
show vlan interface [vlan-list]
Syntax Description
vlan-list
Command Defaults
If vlan-list is not specified, MIB2 interface entries will be displayed for all VLANs.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the interface entry for VLAN 1:
Matrix(rw)->show vlan interface 1
VLAN
-------------------------------------
Table 7-2
Table 7-2 show vlan interface Output Details
Output
VLAN
Port
Storage Type
Port
1
vlan.0.1
provides an explanation of the command output.
What It Displays...
VLAN ID.
Port-string designation.
Whether the entry is stored as a volatile or non-volatile
entry. Volatile entries are lost when a system is reset.
Non-volatile entries are saved in NVRAM and are persistent
until cleared.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Displays the MIB2 interface entry for specific VLAN(s).
Storage Type
non-volatile
VLAN Configuration Command Set
7-17