Logging and Network Management
This chapter describes switch-related logging and network management commands and how to use
them.
NOTE:
The commands in this section pertain to network management of the Matrix
Series device from the
management tasks, including reviewing router ARP tables and IP traffic, refer to
Chapter
12.
11.1 PROCESS OVERVIEW: NETWORK MANAGEMENT
Switch-related network management tasks include the following:
•
Configuring System Logging
•
Monitoring Network Events and Status
•
Configuring SMON
•
Configuring RMON
•
Managing Network Addresses and Routes
•
Configuring SNTP
•
Configuring Node Aliases
•
Configuring NetFlow
switch CLI
(Section
11.2.1)
(Section
11.2.3)
(Section
11.2.4)
(Section
11.2.6)
(Section
11.2.7)
(Section
11.2.8)
Matrix DFE-Platinum and Diamond Series Configuration Guide
only. For information on router-related network
(Section
11.2.2)
(Section
11.2.5)
11
11-1