Port Configuration Command Set
Configuring Broadcast Suppression
4.3.9.1
show port broadcast
Use this command to display port broadcast suppression information for one or more ports.
show port broadcast [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, broadcast status of all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display broadcast information for Fast Ethernet port 2 in module 2:
Matrix(rw)->show port broadcast fe.2.2
Port
Total BC
Packets
-----------------------------------------------------------------------
fe.2.2
165
Table 4-7
Table 4-7 show port broadcast Output Details
Output
Port
Total BC Packets
Threshold (pkts/s) Current broadcast threshold in packets per second on this
4-84 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays broadcast status for specific port(s).
For a detailed description of possible port-string values,
refer to
Threshold
(pkts/s)
148810
provides an explanation of the command output.
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
Total broadcast packets received on this port.
port.
Section
4.1.1.
Peak Rate
(pkts/s)
8
Section
Peak Rate Time
(ddd:hh:mm:ss)
000:05:57:37
4.1.1.