Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.75
show spantree debug
Use this command to display Spanning Tree debug counters for one or more ports.
show spantree debug [port port-string] [sid sid] [active]
Syntax Description
port port-string
sid sid
active
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
6-88 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays debug counters for specific port(s). For
a detailed description of possible port-string values, refer to
Section
(Optional) Displays the debug counters for a specific
Spanning Tree identifier. Valid values are 0 - 4094. If not
specified, SID 0 is assumed.
(Optional) Displays only the debug counters for ports that
have received at least one configuration or RSTP BPDU.
If port-string is not specified, no port information will be displayed.
If sid is not specified, debug counters will be displayed for Spanning Tree 0.
4.1.1.