Set Igmp Query-Enable - Enterasys Matrix 2G4072-52 Configuration Manual

10.4.2.2

set igmp query-enable

Use this command to enable IGMP querying on one or more VLANs.
set igmp query-enable vlan-list
Syntax Description
vlan-list
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable IGMP querying on VLAN 104:
Matrix(rw)->set igmp query-enable 104
Specifies the VLAN(s) on which to enable IGMP querying.
Matrix DFE-Platinum and Diamond Series Configuration Guide
IGMP Configuration Command Set
Configuring IGMP
10-9