Show Port Egress - Enterasys Matrix 2G4072-52 Configuration Manual

VLAN Configuration Command Set
Configuring the VLAN Egress List
7.3.4.1

show port egress

Use this command to display the VLAN membership for one or more ports.
show port egress [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, VLAN membership will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows you how to show VLAN egress information for Fast Ethernet ports 1 through
3 in module 1. In this case, all three ports are allowed to transmit VLAN 1 frames as tagged and
VLAN 10 frames as untagged. Both are static VLANs:
Matrix(rw)->show port egress fe.1.1-3
Port
Number
-------------------------------------------------------
fe.1.1
fe.1.1
fe.1.2
fe.1.2
fe.1.3
fe.1.3
7-30 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays VLAN membership for specific
port(s). For a detailed description of possible port-string
values, refer to
Vlan Egress
Id Status
1 tagged
10 untagged
1 tagged
10 untagged
1 tagged
10 untagged
Section 4.1.1.
Registration
Status
static
static
static
static
static
static