Displaying Scrolling Screens; Scrolling Screen Output - Enterasys Matrix 2G4072-52 Configuration Manual

Startup and General Configuration Summary
Starting and Navigating the Command Line Interface
NOTE: At the end of the lookup display, the system will repeat the command you
entered without the ?.
2.1.6.8

Displaying Scrolling Screens

If the CLI screen length has been set using the set length command as described in
CLI output requiring more than one screen will display
To display additional screen output:
•
Press any key other than ENTER to advance the output one screen at a time.
•
Press ENTER to advance the output one line at a time.
The example in Figure 2-5
more than one screen.
Figure 2-5 Scrolling Screen Output
Matrix(rw)->show mac
MAC Address
----------------------------------------------------------
00-00-1d-67-68-69
00-00-02-00-00-00
00-00-02-00-00-01
00-00-02-00-00-02
00-00-02-00-00-03
00-00-02-00-00-04
00-00-02-00-00-05
00-00-02-00-00-06
00-00-02-00-00-07
00-00-02-00-00-08
--More--
2-16 Matrix DFE-Platinum and Diamond Series Configuration Guide
shows how the show mac command indicates that output continues on
FID Port
1 host.0.1
1 fe.1.2
1 fe.1.3
1 fe.1.4
1 fe.1.5
1 fe.1.6
1 fe.1.7
1 fe.1.8
1 fe.1.9
1 fe.1.10
to indicate continuing screens.
--More--
Type
learned
learned
learned
learned
learned
learned
learned
learned
learned
learned
Section 2.2.3.30,