Configuring Broadcast Suppression - Enterasys Matrix 2G4072-52 Configuration Manual

4.3.9

Configuring Broadcast Suppression

Purpose
To review, disable or set the broadcast thresholds on one or more ports. This limits the amount of
received broadcast frames that the specified port will be allowed to switch out to other ports.
Broadcast suppression protects against broadcast storms, leaving more bandwidth available for
critical data.
Commands
The commands used to review and configure port broadcast suppression are listed below and
described in the associated section as shown.
•
show port broadcast
•
set port broadcast
•
clear port broadcast
(Section 4.3.9.1)
(Section 4.3.9.2)
(Section 4.3.9.3)
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Configuration Command Set
Configuring Broadcast Suppression
4-83