11.2.4.16 set rmon host properties
Use this command to configure an RMON host entry.
set rmon host properties index port-string [owner]
Syntax Description
index
port-string
owner
Command Defaults
If owner is not specified, monitor will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to configure RMON host entry 1 on Fast Ethernet port 5 in module 1:
Matrix(rw)->
Specifies an index number for this entry. An entry will
automatically be created if an unused index number is
chosen. Maximum number of entries is 5. Maximum
value is 65535.
Configures RMON host monitoring on a specific port.
(Optional) Specifies the name of the entity that
configured this entry.
set rmon host properties 1 fe.1.5
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring RMON
11-71