Show Logging Server - Enterasys Matrix 2G4072-52 Configuration Manual

Logging And Network Management Command Set
Configuring System Logging
11.2.1.2

show logging server

Use this command to display the Syslog configuration for a particular server.
show logging server [index]
Syntax Description
index
Command Defaults
If index is not specified, all Syslog server information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Syslog server configuration information. For an explanation of
the command output, refer back to
show logging server
Matrix(rw)->
IP Address
-------------------------------------------------------------------------
1 132.140.82.111 local4 warning(5)
2 132.140.90.84
11-6 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays Syslog information pertaining to a
specific server table entry. Valid values are 1-8.
Table 11-1.
Facility Severity
local4 warning(5)
Description
default
default
Port Status
514 enabled
514 enabled