Clear Inlinepower Management - Enterasys Matrix 2G4072-52 Configuration Manual

General Configuration Command Set
Configuring Power over Ethernet (PoE)
2.2.5.13

clear inlinepower management

Use this command to reset the PoE management mode on a specified module back to the default
setting of "realtime".
clear inlinepower management module-number
Syntax Description
module-number
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the PoE management mode to "realtime" on module 1:
Matrix(rw)->clear inlinepower management 1
2-110 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the module on which to reset the PoE
management mode.