Enterasys Matrix 2G4072-52 Configuration Manual page 427

Example
This example shows how to display SNMP target parameters information:
Matrix(rw)->show snmp targetparams
--- SNMP TargetParams information ---
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Table 5-8
Table 5-8 show snmp targetparams Output Details
Output
Target Parameter Name
Security Name
Message Proc. Model
Security Level
shows a detailed explanation of the command output.
Matrix DFE-Platinum and Diamond Series Configuration Guide
SNMP Configuration Command Set
Configuring SNMP Target Parameters
= v1ExampleParams
= public
= SNMPv1
= noAuthNoPriv
= nonVolatile
= active
= v2cExampleParams
= public
= SNMPv2c
= noAuthNoPriv
= nonVolatile
= active
= v3ExampleParams
= CharlieDChief
= USM
= authNoPriv
= nonVolatile
= active
What It Displays...
Unique identifier for the parameter in the SNMP
target parameters table. Maximum length is 32
bytes.
Security string definition.
SNMP version.
Type of security level (auth: security level is set
to use authentication protocol, noauth: security
level is not set to use authentication protocol, or
privacy).
5-41