Disabling / Enabling And Naming Ports - Enterasys Matrix 2G4072-52 Configuration Manual

Port Configuration Command Set

Disabling / Enabling and Naming Ports

4.3.3 Disabling / Enabling and Naming Ports
Purpose
To disable and re-enable one or more ports, and to assign an alias to a port. By default, all ports are
enabled at device startup. You may want to disable ports for security or to troubleshoot network
issues.
Commands
The commands used to enable and disable ports are listed below and described in the associated
section as shown.
•
set port disable (Section
•
set port enable (Section
•
show port alias (Section
•
set port alias (Section
•
show forcelinkdown
•
set forcelinkdown
•
clear forcelinkdown
4-34 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.3.1)
4.3.3.2)
4.3.3.3)
4.3.3.4)
(Section 4.3.3.5)
(Section 4.3.3.6)
(Section 4.3.3.7)