Show Nodealias - Enterasys Matrix 2G4072-52 Configuration Manual

Logging And Network Management Command Set
Configuring Node Aliases
11.2.7.1

show nodealias

Use this command to display node alias properties for one or more ports.
show nodealias [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, node alias properties will be displayed for all ports.
Command Mode
Read-Only.
Example
This example (a portion of the command output) shows how to display node alias properties for
ge.3.12:
Matrix(rw)->show nodealias ge.3.12
Alias ID
Vlan ID
Protocol
Table 11-15
Table 11-15 show nodealias Output Details
Output
Alias ID
Active
11-140 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays node alias properties for specific
port(s). For a detailed description of possible port-string
values, refer to
= 1533917044
= 1
= ip
provides an explanation of the command output.
What It Displays...
Alias dynamically assigned to this port.
NOTE:
upon packet reception to ports enabled with an alias
agent, which is the default setting on Matrix Series
devices. Node aliases cannot be statically created,
but can be deleted using the
command
Whether or not this node alias entry is active.
Section 4.1.1.
Active
MAC Address = 00-e0-63-04-7b-00
Source IP = 63.214.44.63
Node aliases are dynamically assigned
(Section 11.2.7.7).
= true
clear node alias