IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
12.2.6 Reviewing IP Traffic and Configuring Routes
Purpose
To review IP protocol information about the device, to review IP traffic and configure routes, to
enable and send router ICMP (ping) messages, and to execute traceroute.
Commands
The commands used to review IP traffic and configure routes are listed below and described in the
associated section as shown:
•
show router limits route-table
•
set router limits route-table
•
clear router limits route-table
•
show ip protocols
•
show ip traffic
(Section
•
clear ip stats
(Section
•
show ip route
(Section
•
ip route
(Section
•
ip icmp
(Section
•
ping
(Section
12.2.6.10)
•
traceroute
(Section
12-34 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Section
(Section
(Section
(Section
12.2.6.4)
12.2.6.5)
12.2.6.6)
12.2.6.7)
12.2.6.8)
12.2.6.9)
12.2.6.11)
12.2.6.1)
12.2.6.2)
12.2.6.3)