Set Linkflap Action - Enterasys Matrix 2G4072-52 Configuration Manual

4.3.8.7

set linkflap action

Use this command to set reactions to a link flap violation.
set linkflap action port-string {disableInterface | gensyslogentry | gentrap | all}
Syntax Description
port-string
disableInterface |
gensyslogentry |
gentrap | all
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to set the link flap violation action on port fe.1.4 to generating a Syslog
entry:
Matrix(rw)->set linkflap action fe.1.4 gensyslogentry
Specifies the port(s) on which to set the link flap action. For
a detailed description of possible port-string values, refer to
Section 4.1.1.
Sets the reaction as:
•
Disabling the interface
•
Generating a Syslog entry
•
Generating an SNMP trap message, or
•
All of the above.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Configuration Command Set
Configuring Link Traps and Link Flap Detection
4-77