Table of Contents
Advertisement
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.18
show spantree mstcfgid
Use this command to display the MST configuration identifier elements, including format selector,
configuration name, revision level, and configuration digest.
show spantree mstcfgid
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the MST configuration identifier elements. In this case, the
default revision level of 0, and the default configuration name (a string representing the bridge
MAC address) have not been changed. For information on using the set spantree mstcfgid
command to change these settings, refer to
show spantree mstcfgid
Matrix(rw)->
MST Configuration Identifier:
Format Selector: 0
Configuration Name: 00:01:f4:89:51:94
Revision Level: 0
Configuration Digest: ac:36:17:7f:50:28:3c:d4:b8:38:21:d8:ab:26:de:62
6-30 Matrix DFE-Platinum and Diamond Series Configuration Guide
Section
6.2.1.19:
Hide quick links:
Advertisement
Chapters
Table of Contents
