Enterasys Matrix 2G4072-52 Configuration Manual page 164

General Configuration Command Set
Managing Configuration and Image Files
2.2.9.5 copy
Use this command to upload or download an image or a CLI configuration file.
copy source destination
NOTE: The Matrix module to which a configuration file is downloaded must have the
same hardware configuration as the Matrix module from which it was uploaded.
Syntax Description
source
destination
Command Type
Switch.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to download an image via TFTP:
Matrix(rw)->copy tftp://134.141.89.34/ets-mtxe7-msi newimage
This example shows how to download an image via Anonymous FTP:
Matrix(rw)->copy ftp://134.141.89.34/ets-mtxe7-msi newimage
This example shows how to download an image via FTP with user credentials:
Matrix(rw)->copy ftp://user:passwd@134.141.89.34/ets-mtxe7-msi newimage
2-138 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies location and name of the source file to copy.
Options are a local file path (valid directories are /images
and /slotN), or the URL of an FTP or TFTP server.
Specifies location and name of the destination where the
file will be copied. Options are a slot location and file
name, or the URL of an FTP or TFTP server.