Show Spantree Bridgeprioritymode - Enterasys Matrix 2G4072-52 Configuration Manual

6.2.1.21

show spantree bridgeprioritymode

Use this command to display the Spanning Tree bridge priority mode setting.
show spantree bridgeprioritymode
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Spanning Tree bridge priority mode setting:
Matrix(rw)->
Bridge Priority Mode is set to IEEE802.1t mode.
show spantree bridgeprioritymode
Matrix DFE-Platinum and Diamond Series Configuration Guide
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-33