4.3.6.2
set port negotiation
Use this command to enable or disable auto-negotiation on one or more ports.
set port negotiation port-string {enable | disable}
Syntax Description
port-string
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable auto-negotiation on 1-Gigabit Ethernet port 3 in module 14:
Matrix(rw)->set port negotiation ge.3.14 disable
Specifies the port(s) for which to enable or disable
auto-negotiation. For a detailed description of possible
port-string values, refer to
Enables or disables auto-negotiation.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
Section
4.1.1.
4-53