11.2.4.33 show rmon capture
Use this command to display RMON capture entries and associated buffer control entries.
show rmon capture [index] [nodata]
Syntax Description
index
nodata
Command Defaults
If no options are specified, all buffer control entries and associated captured
packets will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Logging And Network Management Command Set
(Optional) Displays the specified buffer control entry and
all captured packets associated with that entry.
(Optional) Displays only the buffer control entry specified
by index.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring RMON
11-93