Configuring Quality Of Service (Qos) - Enterasys Matrix 2G4072-52 Configuration Manual

9.3.3

Configuring Quality of Service (QoS)

Purpose
To configure Layer 2 QoS transmit queues on one or more ports.
Command Descriptions
The commands to configure the Quality of Service are listed below and described in the associated
section.
•
show port txq (Section
•
set port txq (Section
•
clear port txq (Section
9.3.3.1)
9.3.3.2)
9.3.3.3)
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Priority and Rate Limiting Configuration Command Set
Configuring Quality of Service (QoS)
9-11