Show Nodealias Mac - Enterasys Matrix 2G4072-52 Configuration Manual

Logging And Network Management Command Set
Configuring Node Aliases
11.2.7.2

show nodealias mac

Use this command to display node alias entries based on MAC address and protocol.
show nodealias mac mac_address [ip | apl | mac | hsrp | dhcps | dhcpc | bootps |
bootpc | ospf | vrrp | ipx | xrip | xsap | ipx20 | rtmp | netBios | nbt | bgp | rip |
igrp | dec | bpdu | udp] [port-string]
Syntax Description
mac_address
ip | apl | mac |
hsrp | dhcps |
dhcpc | bootps |
bootpc | ospf |
vrrp | ipx | xrip |
xsap | ipx20 |
rtmp | netBios |
nbt | bgp | rip |
igrp | dec | bpdu |
udp
port-string
11-142 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies a MAC address for which to display node alias
entries. This can be a full or partial address.
(Optional) Displays node alias entries for one of the
following protocols:
•
Internet Protocol
•
Appletalk
•
Media Access Control
•
Hot Standby Routing Protocol
•
Dynamic Host Control Protocol Server
•
Dynamic Host Control Protocol Client
•
Boot Protocol Server
•
Boot Protocol Client
•
Open Shortest Path First
•
Virtual Router Redundancy Protocol
•
Internet Packet Exchange
•
IPX Routing Information Protocol
•
IPX Service Access Point
•
PX Protocol 20 packet
•
Routing Table Maintenance Protocol
•
NetBIOS (raw)
•
NetBIOS (over TCP/IP)
•
Border Gateway Protocol
•
Routing Information Protocol
•
Interior Gateway Routing Protocol
•
Digital Equipment Corporation
•
Bridge Protocol Data Unit
•
User Datagram Protocol
(Optional) Displays node alias properties for specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.1.