Clear Spantree Fwddelay - Enterasys Matrix 2G4072-52 Configuration Manual

6.2.1.38

clear spantree fwddelay

Use this command to reset the Spanning Tree forward delay to the default setting of 15 seconds.
clear spantree fwddelay
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to globally reset the bridge forward delay:
Matrix(rw)->clear spantree fwddelay
Matrix DFE-Platinum and Diamond Series Configuration Guide
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-51