Doors
Disassembly
NOTE: Lower the window fully.
1.
Carefully pry out the trim plate with a fiat tip
screwdriver as shown.
NOTE: To prevent damage to the trim plate, wrap
the end of the screwdriver with a shop towel.
2
Remove the trim plate by pulling it backward and
remove the inside door handle screws.
MOUNTING
Remove the 2 mounting screws while
pulling the handle.
20-6
SCREWS
3. Disconnect the connector and the handle cable,
then remove the inside door handle by pulling it
forward.
4.
Carefully remove the front and rear sash covers.
CLIP
HANDLE CABLE
FRONT SASH COVER
REAR SASH COVER