Honda Acura NSX 1991 Service Manual page 518

Clutch
Reassembly (cont'd)
13. Measure the clearance between the clutch end plate
and top disc with a dial indicator. Zero the dial indicator
with the clutch end plate lowered and lift it up to the
snap ring. The distance that the clutch end plate
moves is the clearance between the clutch end plate
and top disc.
NOTE: Measure at three locations.
End Plate-to-Top Disc Clearance:
Clutch
1 s t 0.65 - 0.85 mm (0.026 - 0.033 in)
2nd 0.75 - 0.95 mm (0.030 - 0.037 in)
3rd 0.75 - 0.95 mm (0.030 - 0.037 in)
4th 0.75 - 0.95 mm (0.030 - 0.037 in)
1 St-Hold 0.70 - 0.90 mm (0.028 - 0.035 in)
14-136
Service Limit
14. If the clearance is not within the service limits, select a
new clutch end plate from the following table.
NOTE: If the thickest clutch end plate is installed but
the clearance is still over the standard, replace the
clutch discs and clutch plates.
PLATE
PART No.
22551 -PX4-003
1 ST CLUTCH
PLATE
PART No.
22631 -PR9-003
PLATE NUMBER
END PLATE
THICKNESS
No. mm (in)
2.1 (0.083)
2.2 (0.087)
2.3 (0.091)
2.4 (0.094)
2.5 (0.098)
2.6 (0.102)
2.7 (0.106)
2.8 (0.1 IO)
2.9 (0.114)
THICKNESS
No. mm (in)
2.1 (0.083)
2.2 (0.087)
2.3 (0.091)
2.4 (0.094)
2.5 (0.098)
2.6 (0.102)
2.7 (0.106)
2.8 (0.1 IO)
2.9 (0.114)