Honda Acura NSX 1991 Service Manual page 878

Hood
-Opener and Latch Replacement
1 . Remove the bolts, then remove the hood release handle and disconnect the opener cable.
2. Remove the 3 mounting bolts and cover, then remove the hood latch and disconnect the opener cable.
3. Remove the left side inner fender, then pull out the opener cable.
NOTE:
l . O m m
7 lb-ft)
COVER
HOOD EDGE 'ClJSHItiN.
Turn as necessary, to make the
hood fit flush with the bumper
and headlight lid.
4. After installing, adjust the hood fit to the opening,
ALIGNMENT:
necessary to equalize the gap between the hood and
the bumper.
HOOD SWITCH
Be careful not to damage the
HOOD LATCH
10 N-m (1.0 kg-m,
7 lb-ft)
I
HANDLE
To remove the handle,
remove the side sill trim (page
A - - - - -
OPENER CABLE
first
7 lb-ft)
- - - - - -
, ,
-