Honda Acura NSX 1991 Service Manual page 663

Front Suspension
Hub Replacement (cont'd)
5. Separate the wheel bearing from the hub using the
special tools and a hydraulic press.
CAUTION:
pressed clear.
HUB DlSl
ASSEMBLY BASE
6. Remove the outboard
hub using the a commercially available bearing
puller.
CAUTION: To prevent damage to the tool make
sure the threads are fully engaged before pressing.
NOTE: Wash the bearing and hub thoroughly in
high flash point solvent before reassembly.
press
W H E E L
BEARING
inner race from the
bearing
NOTE: Replace the bearing with a new one after
removal.
7. Press a new wheel bearing into the hub using the
special tools shown and a hydraulic press.
HUB ASSEMBLY
DRIVER ATTACHMENT
8. Install the pulser.
NOTE: Be sure the pulser engages with the pin on
the spindle.
Hydraulic press
BASE
HUB DlSlkSEMBLY
PIN