13. After the clearances have been adjusted properly,
reinstall
the
weatherstrip.
14. Reinstall the door trim.
15. With the door and glass closed fully, check that the
weatherstrip is not pinched by the door glass.
Section: @I - @
WINDSHIELD
G L A S S
DOOR TRIM
Section: @ - @
Section: @
RETAINER
A S S
16. With the door and glass closed fully, check for
water leaks.
NOTE: Do not use high pressure water.
17. install the control switch panel in the door panel.
18. Install the door harness.
19. Attach the plastic cover, and install the door panel.
20. Check for air leaks.
2 0 - 1 7